Number of Channels	8 in 8 out
AD/DA Conversion	Sample Rate: 96.0 kHz/48.0kHz/44.1kHz, Signal Processing: 24 bits
Frequency Response	-2 dB/+0 dB (@ +4 dBu, 20 Hz to 20 kHz)
Total Harmonic Distortion + Noise	0.04 % or less (Pad: On, Input Gain: +4 dBu, 22 Hz to 20 kHz)
Dynamic Range	110 dB
Cross Talk	-80 dB or less (Input Gain: +4 dBu, typ.)
Nominal Input Level	-65 to -10 dBu (PAD: Off), -45 to +10 dBu (PAD: On) (1 dB step, Max. +28 dBu)
PAD	20 dB On/Off
Input Impedance	7 k ohms
Nominal Output Level	+4 dBu, Max. +22 dBu
Output Impedance	600 ohms
Recommended Load Impedance	10 k ohms or greater
Residual Noise Level (IHF-A, typ.)	-80 dBu or less
Equivalent Input Noise Level (E.I.N.)	-128 dB
Network Latency	375 microseconds when using REAC cable only *1 (AD - REAC - DA Latency: about 1.2 ms)
Connectors	Input x 8 (XLR type, balanced, phantom power, INPUT 1-8) Input x 2 (TRS type, balanced, INPUT 5/6) *2 Input x 2 (TRS type, balanced, with Hi-Z switch, INPUT 7/8) *2, *3 Output x 8 (XLR type, balanced) REAC EMBEDDED POWER x 1 (RJ-45 EtherCon type) REMOTE x 1 (RS-232C, DB-9 type), DC IN x 1 (XLR 4pin type)
Power Supply	REAC EMBEDDED POWER or External Battery (DC 12V - 18V)
Power Consumption	26W (DC 12V)
Phantom Power	+48 V/14 mA (each input, remote controlled)
Dimensions	220.0 (W) x 176.0 (D) x 156.6 (H) mm, 8-11/16 (W) x 6-15/16 (D) x 6-3/16 (H) inches
Weight	2.9 kg, 6 lbs 7 oz
Accessories	Battery Plate Holder and Fastening Screws (8 pcs), REAC Connector Covers x 1 Ferrite Core x 2, Fastening Screw x 4, Owners Manual